To do this on Windows, click the speaker icon in the bottom right corner of the screen and select Playback L/R (Revelator IO 24). The next step is to route the computer's system audio to the mixer in UC. You can control the Gain and the level of each Input, as well as the Fat channel processing in the Universal Control Mixer. Next, click the encoder once to select 48V then turn the encoder to turn on phantom power. To do this, press the button for the channel you wish to select (either 1 or 2).

You can also turn this on by using the controls on the device itself. You can turn this on by clicking the 48V button on this channel in Universal Control. If you are using a condenser microphone, this will require phantom power to power the microphone. The Revelator IO24 has two Dual inputs which can be used to connect a microphone or an instrument, depending on your use case.

Here you will see individual channels for each of the three Inputs on the device along with three other channels: Playback, Virtual A, and Virtual B.įirst, you will need to set the level for inputs. To open the mixer, open Universal Control and click on the Revelator IO24 icon.

This article outlines the steps involved in setting up a Livestream in Streamlabs OBS using the Revelator IO24, the Software Mixer built into Universal Control, and one of the Virtual Audio Outputs. PLEASE NOTE: Install Universal Control for access to the mixer, firmware updates, and extended preset editing.

Streamlabs obs setting